I believe you have learned a lot about the matters needing attention when using the light touch switch, but today you will be able to explain some of the latest knowledge. Maybe it will help you.

Method 1. Dust Countermeasures

Because there is no switch with sealed structure, do not use it in places with dust. When it has to be used, protective measures such as covering should be considered.

Method 2. About Preservation

In order to prevent terminal discoloration, do not store lightly touched switches in high temperature, high humidity, direct sunlight or corrosive gases.

Method 3. Operational methods

No strong repetitive operation is allowed. If the plunger has been pressed under further pressure, excessive load weight may lead to the deformation of the circular panel spring, which is the cause of poor action. Especially if the load on the transverse pressure type is too large, the riveting part will be damaged, which becomes the reason for the breakage of the switch. Therefore, when touching the switch in installation and operation, please be careful not to add a load weight higher than the overload weight (29.4N, 1 minute, 1 time). Please press the plunger to set the switch in the direction of vertical movement. Pressing only one side of the plunger, or the oblique orifice, may result in reduced durability.

For the use of light touch switch, we believe that you will learn more about these aspects.