After more goods are switched on, the goods need to be stored. In this case, we need to pay attention to some problems. What are the specific problems? Dongguan Dongkun Electronic Technology Co., Ltd. will give you a detailed introduction, the following is a detailed method.

In order to prevent terminal discoloration, please do not save the toggle switch products under the following conditions.

1. High temperature and humidity.

2. Environment with corrosive gases.

3. Places where the sun shines directly.

Use operation:

I. Operational methods

1. No strong repeated operation is allowed. If the plunger has been pressed under further pressure, excessive load weight may lead to the deformation of the circular panel spring, which is the cause of poor action.

2. The riveting part will be damaged if the load is too heavy on the transverse pressure type, which is the reason for the breakage of the switch. Therefore, during installation and operation, please be careful not to add more than the overload weight (29.4N, 1 minute, 1 time).

3. Please set the switch in the direction that the plunger can operate in the vertical direction. Pressing only one side of the plunger, or the oblique orifice, may result in reduced durability.

II. Dust Countermeasures

Because there is no switch with sealed structure, do not use it in places with dust. When it has to be used, protective measures such as covering should be considered.

Above is the storage method of switching switch. Please pay attention to these problems and do a good job in warehouse storage.